Vertical Tank

Code No. U.S Gallon Dia (mm) H-1 (mm) Total Height (mm) Threaded Manhole (mm) Approx. Wall Thick (mm)
PS-2 200 1050 1000 1160 420 5
PS-3 300 1150 1160 1350 420 6
PS-4 400 1305 1350 1525 420 6
PS-5 500 1325 1490 1690 420 6
PS-6 600 1470 1350 1650 420 8
PS-8A 800 1510 1960 2185 420 8
PS-8 800 1660 1380 1760 420 8
PS-10 A 1635 1830 1380 2080 420 8
PS-10 1000 1880 1320 1680 420 8
PS-12 1200 1930 1555 1935 420 8
PS-15 1500 2020 2105 2405 420 9
PS-20 2000 2120 2120 2520 420 10
PS-30 3000 2400 2500 3000 420 10
PS-40 4000 2600 2880 3280 420 12
PS-50 5000 2900 2880 3280 420 12

HORIZONDAL TANK

U.S Gallon Dia (mm) Length (mm) Threaded Manhole (mm) Approx. Wall Thick (mm) Approx. Wall Thick (mm)
300 960 1655 420 6 6
400 1125 1625 420 7 7
500 1155 1960 420 8 8

SALIENT FEATURES OF POLYCOM WATER TANK

  • It comes out from our in-house design facilities, which gives us the flexibility to design a most suitable storage tank for this region’s climates and needs.
  • It is manufactured from %FDA approved materials and will not impart any taste or residue, meetingthe requirements for safe storage of drinking water.
  • Our tanks UV stabilized and will not breakdown under the harsh outdoor weather condition. The black opaque colour helps to prevent water borne algae growth.
  • It can be used for the storage of drinking water, agriculture irrigation, fire protection, water treatment and other water related uses.
  • The tanks are manufactured by Rotational Moulding Process, which produces one-piece, seamless, watertight tank.
  • Our tanks are clean, leak proof and having inside and outside smooth finishing
  • It will not chip, rust, peel or corrode.
  • It can be place on any flat, firm, level surface for simple installation.
  • It is easy to carry to any distance and height.
  • Extra fittings can be easily added and allow for the installation of additional accessories and system components.
  • These tanks are maintenance free if it is installed properly
  • The threaded manhole covers protects the contents from outside dust and impurities
Available in different models and capacities.
  • Vertical Cylindrical Type (200 to 5000 US Gallon)
  • Horizontal Cylindrical Type (300, 400, 500 & 1000 US Gallons Capacity)
  • Polyolefinic insulated tanks up to 5000 US Gallon
Installation as per the instructions given below
  • Improper handling and installation can result in damage the tank
  • Support the bottom of tank firmly and completely. Concretes smooth surface provide the best foundation.
  • Plastic male threaded sockets are designed to be hand tightened. Over tightening can causes fitting to leak.
  • Do not mount heavy equipment on top of the tank.
  • Do not allow any weight on tank fittings, must be supported pipes and valves
  • The air vent should be open always to evacuate volume of air for easy water filling or discharge.
  • Protect tanks from impact, especially at temperature below 40 degree C
  • If the tank is installed any carried improper we never take any responsibility.
Specifications of materials used
Physical Properties Unit Testing Method
DENSITY g/cm3 ASTM D 1605 0.938
TENSILE STRENGTH AT YIELD Kg/cm2 ASTM D 638 200
TENSILE STRENGTH AT BREAK Kg/cm2 ASTM D 638 270
ELONGATION AT BREAK % ASTM D 1605 1000
IZOD IMPACT STRENGTH Kg. Cm/cm ASTM D 256 13
FLEXURAL MODULUS Kg/cm2 ASTM D 790 6700
HARDNESS SHORD - ASTM D 2240 60
ENVIRONMENTAL STRESS CRACKING RESISTANCE F50.hr ASTM D 1693 200
MELTING POINT OC ASTM D 2117 128
MELT FLOW RATE g/10min ASTM D 1238 4.0
VICAL SOFTNING POINT OC ASTM D 1525 117
AVERAGE PARTICLE SIZE Micron AOC.T.049 400
HEALTH CLASSIFICATION 0 NFPA 0
REACTIVITY CLASSIFICATION 0 NFPA 0